.  HSS M2 Tool Bit used for general lathe works like Tuening and Boring of material like mild steel & Alloy steel
   [Low Hard Material]
. HSS Cobalt Grade Tool Bits are Used for General Lathe Works Turning,Boring & Milling but for Hard Material with             increase wear Resistance
.  Type of Tools BItts
   a) HSS Round Tool Bits            b)HSS Square tool Bits 
   c) HSS Rectangular Tool Bits    d)HSS Parting Tools
   e) HSS Engraving Tool Bits

.  Material: Made of High Speed Steel Grade
   a)M2 With HRC 62-63~,   b) M35 with HRC 63-66~5% cobalt 
   c)M42 with HRC 65-69~-8% Cobalt
   d)T42 with HRC 64-67~ - 10% Cobalt
.  Size Available Both Metric & Imperial

.  Length for Round & Square Tool Bits
              
              Metric: 25mm to 200mm
              Imperial: 1"to 8"inches

.  Size of Square Tool Bit
       
            Metric: 2mm to 25mm
            Imperial: 3/32"to 1"inches
            Tolerance H8

.  Size of Rectangular Tool Bit

            Thickness: 2mm to 20mm
            Width    : 8mm to 25mm 
            Length   : 75mm to 200mm
                          : 3"to 8inch
            Tolrence : H12

.  Size of Parting tool Bit
            
           Thickness: 2mm to 20mm
                         :3/32 to 1/4 inches
           Width    : 10mm to 25mm
                        : 1/2"to 1"inches
           Length   : 75mm to 200mm
                         : 3" to 8 inch 
          Tolerance : H12
           
.  Size of Engraving Tool

              Diameter : 1.5mm to 25mm
              Length   : 75mm to 200
              Tolerance : H8

Manufacturing Standard : ISO 5421, DIN 4964
Packed in CardBoard Box